Manufacturing method of customized Metal gasket

Author:

Source:

Release time:

2022-05-01

The manufacturing method of customized metal gasket is characterized in that: when manufacturing the customized metal gasket with the following substrate, the substrate is formed by coating a rubber coating on the surface of a metal plate through a primer and an adhesive and has at least a fluid channel hole and an annular rib surrounding the fluid channel hole. In the manufacturing method, a metal plate with low temperature aging hardening properties is used as the metal plate of the base plate, and the bottom plate is The paint is applied on the metal plate of the base plate, after the primer is dried at a temperature lower than the low temperature aging hardening temperature of the metal plate, the annular rib is punched on the metal plate, and thereafter , at the low-temperature age-hardening temperature of the metal plate of the base plate, while the primer is calcined, the metal plate is age-hardened. Thereby, it is possible to manufacture an annular rib which is difficult to creep even if it is deformed and Customized Metal gasket with excellent durability.

The above is a brief introduction to the relevant knowledge about the manufacturing method of customized metal gasket.