Matters needing attention in the placement and disassembly of customized Mini cylindrical roller!

Author:

Source:

Release time:

2021-06-23

Many people apply improper placement techniques in the placement of the customized Mini cylindrical roller, resulting in the destruction of the bearing. So do you know what you need to pay attention to for correct placement and disassembly? Follow the editor to have a simple understanding!
1. Placement
1. Before placing the customized Mini cylindrical roller on the shaft, you need to remove the fixing pin of the bearing coat, and at the same time, polish the surface of the journal to be smooth and clean, and apply oil to the journal to prevent rust and lubricate (allow the bearing to be slightly on the shaft scroll).
2. Apply lubricating oil on the joint surface of the bearing seat and the bearing, and put the bearing into the bearing seat. Then put the installed bearing on the shaft together with the customized Mini cylindrical roller seat. Push to the required position for resettlement.
3. Do not tighten the bolts that fix the bearing seat, so that the bearing jacket can roll in the bearing seat. Install the other shaft on the same shaft in the same way

Two, disassembly
1. Use an Allen key to loosen the locking screw on the bearing eccentric sleeve, then use a small iron rod to insert the counterbore on the top cover eccentric sleeve, and loosen the eccentric sleeve against the direction of shaft rotation.
2. Loosen the bolts fixing the bearing seat. Remove the bearing together with the bearing seat from the shaft. Take care before removing the bearing seat at one end of the shaft. The bearing seat bolt at the other end of the shaft should be loosened to prevent the two bearings from being damaged by mutual force.
In summary, the editor tells: You can learn more about the placement and disassembly of the customized Mini cylindrical roller.