Mini bearing roller supplier china introduces the installation knowledge of bearing rollers

Author:

Source:

Release time:

2021-10-27

Do you know what the installation knowledge of bearing rollers is? Follow the editor of Mini bearing roller supplier china to have a simple understanding!
1. Wash the bearing with kerosene, press it into the bearing seat, fill the rollers of the outer ring of the bearing with Shell No. 3 lithium base grease to two-thirds full, apply it evenly with a clean hand, install the ntn bearing gland, and use it to add The tightening bolt of the bolt anti-loosening glue presses the bearing gland;
2. The bearing is a cylindrical roller bearing with a separable inner and outer sleeve. The inner sleeve of the bearing should be placed on the shaft and in place;
3. Install the bearing seat on the casing. If there is a grease filling hole, it needs to be aligned. Tighten the bearing seat with fastening bolts coated with bolt anti-loosening glue;

4. Install the inner and outer eccentric block on the shaft and place it in place. For those with shaft key, install the shaft key in the keyway and then install the outer eccentric block, and install the shaft retaining ring on the shaft;
5. Tighten the fastening bolts of the eccentric block, turn the adjustable eccentric block to the angular position before removal and tighten the fastening bolts. After the above assembly is completed, the rotating shaft should have a certain axial movement;
6. Upper the protective covers at both ends of the vibration motor and fasten them with screws.
The above is the editor of Mini bearing roller supplier china: a brief introduction to the installation knowledge of bearing rollers.