Metal gasket

Category:

Rollers for crossed-roller bearings

Keywords:

Metal gasket

A gasket is a mechanical seal between two objects, and is usually used to prevent pressure, corrosion, and natural expansion and contraction of the pipeline from leakage between the two objects.

Main parameter
Similar Specification
Main uses

- Commodity name: Metal gasket
- Commodity ID: 1182644207819051008
- Out diameter & tolerance: 11.80±0.005mm
- Length & tolerance: 3.40(+0/-0.03mm)
A gasket is a mechanical seal between two objects, and is usually used to prevent pressure, corrosion, and natural expansion and contraction of the pipeline from leakage between the two objects.

Material: GCR15 (Equal to AISI52001)

Hardness: HRC60-65

Out diameter tolerance: 11.80±0.005mm

Length tolerance: 3.40(+0/-0.03mm)

Parallelism: 0.005mm

Perpendicularity: 0.005mm

Endface runout: 0.005mm

Roundness: 0.0005mm

Roughness: Ra0.06um

A gasket is a mechanical seal between two objects, and is usually used to prevent pressure, corrosion, and natural expansion and contraction of the pipeline from leakage between the two objects. Since the machined surface cannot be perfect, the irregularities can be filled with gaskets. Gaskets are usually made of sheet materials, such as paper backing, rubber, silicone rubber, metal, cork, felt, neoprene, nitrile rubber, glass fiber or plastic polymers (such as polytetrafluoroethylene). Gaskets for certain applications may contain asbestos.
Key words:
- Metal gasket
- Gasket

OD Series	Describes (OD*Length)
1.50mm series	1.501.40, 1.501.43, 1.50*1.45
2.00mm series	2.001.90, 2.001.93, 2.00*1.95
2.50 mm series	2.502.40, 2.502.43, 2.50*2.45
3.00mm series	3.002.80, 3.002.93, 2.80*1.50
3.50 mm series	3.503.40, 3.503.45, 3.30*1.50
4.00 mm series	4.003.80, 4.003.93, 3.80*1.90
4.50 mm series	4.504.30, 4.504.40, 4.30*1.90
5.00 mm series	5.004.80, 5.004.90, 4.80*2.20
5.50 mm series	5.505.30, 5.505.40, 5.30*2.20
6.00 mm series	6.005.80, 6.005.90, 5.80*2.20
7.00 mm series	7.006.80, 7.006.90, 6.80*2.50
8.00 mm series	8.007.80, 8.007.90, 7.80*2.50
10.0 mm series	10.09.80, 10.09.90, 9.80*2.50

1: Crossed roller bearings
2: Robot joint bearings
3: Precision rotary table bearings
4: Precision main shaft bearings
5: High precision bearings for precision instruments
6: Spacer block for temperature-resistant bearing
7: Fixing pin for crossed-roller bearings
8: Crossed-roller bearing for wind power generator