Automatic feeding device for customized Small shaft supplier

Author:

Source:

Release time:

2022-03-22

The automatic feeding device of the customized Small shaft supplier includes a vibrator, a conveying track is fixedly installed on the vibrator, the conveying track is U-shaped, the upper baffle is fixedly installed directly above the conveying track, and the right side of the conveying track is an inclined The feeding tube, the inclination angle of the feeding tube is greater than 60 degrees, the upper end of the feeding tube is connected with the vibrating feeding tray, the customized Small shaft supplier is closely arranged in the feeding tube, and the left side of the conveying track is the feeding mechanism, which includes a feeding cylinder The pusher plate at its end is provided with a gap, and the side baffle is installed on one side of the conveying track along the movement direction of the pusher cylinder; customized Small shaft supplier Falling into the conveyor track, the vibrator drives the closely arranged small shaft suppliers to move to the left gradually. When a customized Small shaft supplier completely enters the gap of the ejector plate, the ejector cylinder will push it out and the manipulator will complete the grab; the device design is reasonable , instead of placing the customized Small shaft supplier manually, it is safe and reliable, and it cooperates with the operation of the manipulator and has a high degree of automation.

The above is a brief introduction to the knowledge of the automatic feeding device of customized Small shaft supplier.